Ships Canada-wide
Notice: We strongly recommend two layers of our Top Layer Polyurethane to protect the floor’s surface.
Ceramic Marble Cork Flooring
The look of white marble with the warmth of cork: a 12 mm Uniclic floating plank rated for 19 dB impact noise reduction.
If you love the look of white marble but not the upkeep, Ceramic Marble is the answer. Each plank carries a soft off-white, marbled cork decor: the veining and movement of stone, rendered in a surface that stays warm and quiet underfoot.
The construction is a full 12 mm (1/2 in) sandwich: a 3 mm stained cork wear surface over a 6 mm E1 class high density fibreboard core, with a 3 mm cork underlay already attached. Planks measure 900 mm x 300 mm (35 7/16 in x 11 13/16 in) and click together with the industry-leading Uniclic profile, so the floor floats without glue or nails.
Cork provides cushioning and thermal insulation. Compare the acoustic test report for the complete floor assembly, and follow the product’s installation and care requirements.
Rated domestic class 23 and light commercial class 36, it is built for everyday use in kitchens, living rooms, bedrooms, and entryways, and it installs above, on, or below grade.
Why this floor
- Impact noise reduction of 19 dB (ISO 140-8) and Impact Insulation Class IIC 55 on 140 mm (5.5 in) concrete without a suspended ceiling.
- Uniclic click-lock profile: a floating installation with no adhesive required.
- Three-layer build: 3 mm stained cork over a 6 mm E1 class high density fibreboard core with a 3 mm cork underlay attached, 12 mm (1/2 in) total.
- Durability rated domestic class 23 and light commercial class 36, with an impact-resistant, stain-resistant surface protected by a high resistance Natural Shield water-based polyurethane wear layer.
- Greenguard Gold certified, made with formaldehyde-free adhesives, and backed by a VOC and formaldehyde test report.
- Review the selected product’s emissions documentation and cleaning requirements.
- Compatible with hydronic and underfloor radiant heating, and approved for above, on, and below grade installation.
See it in action
Important product note
Because this is a floating floor, a site-applied polyurethane finish is required after installation. This step seals the seams of the clicked-together planks and completes the wear surface. Plan for it as part of your installation before putting the room back into service.
Flooring
Cork Underlayment
Supplies & Guides
Jason Carlson –
This is a beautiful cork floor. I installed this in two bedrooms and the kitchen. I don’t know yet how it will wear in the kitchen because we haven’t finished the kitchen yet so we still have the floor covered during construction. I did use two coats of polyurethane on the kitchen floor to seal the seams. (this was recommended for cork flooring in a kitchen). It was very easy to install.