Bris Stone

Bris Stone Cork Flooring

The clean, modern look of natural limestone with the quiet warmth only cork can deliver.

Bris Stone pairs the elegant look of natural limestone with the comfort of cork. Its light grey-beige tones read calm and contemporary, a natural fit for kitchens, living areas, and even nurseries where you want a floor that feels as good as it looks.

Each 620mm x 450mm (24-23/32" x 17-46/64") plank is built in three layers: a 3mm cork top layer sealed under a HotCoating wear surface, a 6.8mm E1 grade moisture resistant HDF core, and a 1.2mm agglomerated cork backing that acts as a built-in underlay. Made in Switzerland, the floor clicks together with the patented Uniclic system to form a watertight joint, so planks lock tight with no open seams.

Underfoot, cork's honeycomb cell structure (roughly 40 million cells per cubic centimetre) makes the surface permanently elastic and thermally insulating. It stays comfortable in bare feet year round, cushions your ankles as you walk, and knocks impact sound down by 18 dB. Because cork is peeled from the bark of the cork oak without felling the tree, it is also a genuinely sustainable choice.

With a class 33 commercial rating, an AC5 abrasion result, and compatibility with electric, hydronic, and underfloor radiant heat, Bris Stone is a floor you can put almost anywhere in the house, including the basement.

Why this floor

• Limestone look, cork comfort: light grey-beige tones with a wood emboss semi-matte texture, soft and warm underfoot.
• Rated for hard use: durability class 33 commercial and class 23 domestic (EN 16511) with an AC5 abrasion resistance result.
• Quiet by construction: 18 dB impact sound reduction (EN ISO 717-2) from cork's honeycomb cell structure, about 40 million cells per cm³.
• Watertight joint: patented Uniclic click-lock system with locking strength above 500 kg per linear metre (ISO 24334), no open joints.
• Three-layer build: 3mm cork wear layer over a 6.8mm E1 grade moisture resistant HDF core, plus a 1.2mm agglomerated cork backing that replaces a separate underlay.
• Healthy-home credentials: VOC-free, emissions in conformity with AgBB, and a Cfl s1 reaction to fire rating.
• Warm floor, lower bills: thermal resistance of 0.108 m² K/W, and approved for electric, hydronic, and underfloor radiant heating.

See it in action