Mocha

Mocha Cork Flooring

A deep, coffee-toned cork plank from Switzerland, rated for commercial traffic yet warm and quiet enough for a bedroom. Mocha brings a rich, dark roast colour to natural cork. Each 1235 mm x 200 mm (48 5/8 in x 7 7/8 in) plank is built around a 3 mm cork wear surface, so the character you see is genuine cork bark, harvested without felling a single tree: cork oaks live up to 200 years and can be peeled up to 20 times. Underfoot, the difference is immediate. Cork's honeycomb cell structure (roughly 40 million cells per cm³) traps an air-like gas that insulates against cold and cushions every step. The floor stays comfortable year-round, so walking barefoot in winter no longer means cold feet, and its permanent elasticity is gentle on ankles and joints. The 11 mm (7/16 in) plank is a true three-layer construction: 3 mm cork on top, a 6.8 mm E1-grade moisture-resistant HDF core in the middle, and a 1.2 mm agglomerated cork backing that adds a built-in underlay. The HotCoating surface protection earns this floor commercial class 33 and domestic class 23 ratings, so it keeps its looks for years, not seasons. Planks lock together with the patented Uniclic click system and a watertight joint, floating over the subfloor with no glue or nails. It is approved above, on, and below grade, which makes Mocha a strong pick for basements, condos, and busy main floors alike.

Why this floor

• 18 dB impact sound reduction (EN ISO 717-2), thanks to cork's honeycomb cell structure and the 1.2 mm agglomerated cork backing.
• Rated commercial class 33 and domestic class 23 (EN 16511) with AC5 abrasion resistance: shop-floor durability in a natural material.
• Patented Uniclic click lock with watertight joints; the HDF locking strength exceeds 500 kg per linear metre (ISO 24334) and surpasses European standards, so joints stay tight with no gaps.
• Natural thermal insulation: 0.108 m² K/W thermal resistance from approximately 40 million air-filled cells per cm³.
• E1-grade moisture-resistant HDF core with 24-hour swelling below 8% (EN 317), approved for above, on, and below grade installation.
• Compatible with hydronic and underfloor radiant heating.
• Low emissions in conformity with AgBB, finished with a Natural Shield water-based polyurethane.

---

See it in action

---