Cocoa

Cocoa Leather Flooring

Genuine chrome-free leather underfoot: a rich cocoa-brown plank, Swiss made, that clicks together and floats over your subfloor.

Cocoa brings the deep, warm brown of real leather to the floor. Because the surface is genuine bonded leather, natural shade differences are visible from plank to plank; that variation is a normal characteristic of the material and gives the finished floor the depth of a well-worn leather piece rather than a printed pattern.

Each 915 x 305 mm (36 x 12 in) plank is built in three layers: a genuine bonded leather top over a 6.8 mm E1 grade moisture-resistant HDF core, finished underneath with 1.2 mm of agglomerated cork. A HotCoating wear layer with a high-resistance matte finish seals the leather surface, so the plank carries an AC4 abrasion rating along with scratch and chemical resistance.

The leather is 100% chrome-free and responsibly gathered from European tanneries' off-cuts, so no animal is harmed for the floor and less material goes to waste. Underfoot it feels softer than wood or laminate, eases joint strain, and the cork backing cuts impact sound by 17 dB, which keeps rooms noticeably quieter.

Rated commercial class 32 and domestic class 23, Cocoa is at home in living rooms and bedrooms as well as boutiques, offices, and hotel spaces. It installs above, on, or below grade, works over radiant heat, and can even go on walls as a feature surface.

Why this floor

• Genuine bonded leather wear surface, 100% chrome-free, made from European tannery off-cuts: an ethical, low-waste route to a real leather floor.
• HotCoating finish delivers an AC4 abrasion rating with scratch and chemical resistance (EN 423 rated "very good durability"), ready for commercial kitchens and busy lobbies.
• 17 dB impact sound reduction (EN ISO 717-2) from the 1.2 mm agglomerated cork backing.
• Rated for commercial class 32 and domestic class 23 use (EN 16511), backed by a 15-year residential warranty.
• 6.8 mm E1 grade moisture-resistant HDF core with 24-hour thickness swelling under 8%, approved for above, on, and below grade installation.
• Uniclic click-lock floating installation: no glue, no nails, and click joints tested to over 500 kg/m transverse tensile strength (ISO 24334).
• Compatible with electric and hydronic underfloor heating, with a low thermal resistance of 0.088 m² K/W.

See it in action