Striato

Striato Cork Wall Panels

Sculpted three-dimensional cork panel made in Italy. Published impact-sound data lists up to 66 dB; review the tested floor assembly and the applicable wall-panel acoustic report.

Striato is a 3D cork wall panel with a ridged, linear relief carved into 6 mm of natural cork. The raised surface does more than look striking: those contours scatter sound waves in every direction, which is why this panel is rated for maximum sound diffusion. Light rakes across the ridges and gives the wall depth and movement that a flat panel cannot match.

Under the sculpted face sits a three-layer build: the 6 mm natural cork surface, a 3 mm MDF core certified to the CARB Phase 2 California air-quality standard, and a 2 mm anti-vibration cork backing. The result is a rigid, dimensionally stable panel at 11 mm (7/16 in) thick that also decouples the surface from the wall behind it.

It is approved for both wall and ceiling installation, so you can carry the texture overhead for full acoustic treatment.

Why this wall

• Acoustic performance: impact sound improvement (Delta IIC) rated up to 66 dB.
• Maximum sound diffusion from the sculpted 3D relief surface.
• Three-layer construction: 6 mm natural cork over a 3 mm MDF core with a 2 mm anti-vibration cork backing, 11 mm (7/16 in) total.
• MDF core is compliant with the CARB Phase 2 California Air Resources Board standard for low emissions.
• Natural cork provides thermal insulation. Review the selected product’s fire rating and emissions documentation.
• Rated for walls and ceilings, so one product treats the whole room.
• Made in Italy from natural cork, backed by a 5-year warranty against manufacturing defects.