Woodflow T-Molding

Custom T-Molding – Special Order Item

Special order: allow approximately 2 weeks for production. Ships with your complete order. No returns or exchanges.

Product Specifications:

• Thickness: The T-molding is crafted to match the thickness of your flooring planks, joining adjacent floors.
• Length: It shares the same length as the flooring planks in matching color.
• Width: 1.5 inch
• Coating: Please note that a separate application of coating is required, both on the floor and the T-molding.
• Usage: Use this T-molding between rooms with flooring at the same height. Do not use it between carpet and cork flooring.
• Adhesive Thickness: When applying adhesive, maintain a thickness of 4mm. Avoid excess adhesive application to prevent obstructing floor expansion and contraction.

Installation Instructions: To properly install the T-Molding, you will need the following tools: measuring tape, miter saw or power saw, construction adhesive, caulk gun, and a damp cleaning cloth.

Step 1: Begin by measuring the width of the doorway between the two floors. Utilize a miter saw or power saw for precise cuts.

Step 2: Apply construction adhesive along the bottom of the gap between the two floors.

Step 3: Press the T-molding into the gap so its top sits against both floors without a gap. Do not glue the lips of the molding to the floor.

Step 4: Any excess glue should be promptly wiped away with a damp cloth.

Step 5: For stability, weigh down the molding using heavy objects overnight. Ensure that these objects do not create tripping hazards.

Step 6: Finish the installation by applying Loba AT for a polished look.

Follow the T-molding installation instructions below.

Trim profile thickness	12mm (1/2")
Board Length	900mm (35 1/2 Inch)
Country of origin	Portugal
Weight (packing)	3 lbs
Dimensions (packing)	37 × 13 × 4 in