Earthy Pine

Earthy Pine Natural Composite Flooring

Forna Natural Composite in a warm pine tone, built on a fully waterproof Hydrowood core with a quiet cork backing. Earthy Pine pairs the soft, natural warmth of a pine-toned surface with the honest character of natural linseed composite. The colour is made to last: with a lightfastness rating above 7 (ISO 105), it holds its hue even in sun-filled rooms, so the floor you install is the floor you keep. Each 1235 mm x 200 mm (48 5/8 in x 7 7/8 in) plank is built in three layers: a 1.5 mm natural linseed composite surface, a 6.8 mm waterproof Hydrowood core, and a 1.2 mm agglomerated cork backing. the natural composite surface itself is made largely from renewable raw materials: linseed oil, pine resin, limestone, cork wood flour, and jute. Underfoot, the natural-composite-and-cork sandwich feels warmer and quieter than hard-surface floors, cutting impact noise by 17 dB and adding thermal insulation. Because the core is waterproof (24 hour swelling under 1 percent, EN 317), you can run it through kitchens, entries, and below-grade basements without worry. With a class 33 commercial durability rating, castor-chair suitability, and a hardwearing polyurethane wear layer, Earthy Pine is as at home in a busy shop or office as it is in a family hallway. Planks click together with a Uniclic locking profile, so the floor floats over the subfloor with no glue and no nails.

Why this floor

• Fully waterproof Hydrowood core: 24 hour swelling value under 1 percent (EN 317), suitable above, on, or below grade.
• Commercial class 33 and domestic class 23 durability (EN 16511), backed by a 15 year residential and 5 year commercial warranty.
• 17 dB impact sound reduction from the natural linseed composite layer bonded to a pressed cork backing.
• Lightfastness above 7 (ISO 105): the pine colour resists fading even with substantial sun exposure.
• natural linseed composite surface made largely from renewable materials: linseed oil, pine resin, limestone, cork wood flour, and jute.
• UL GREENGUARD Gold certified for low emissions and healthier indoor air, with AgBB emissions testing.
• Uniclic click joints with locking strength above 650 kg per linear metre, compatible with electric and hydronic underfloor heating (thermal resistance 0.09 m² K/W).

---

See it in action

---